Olympic annular tube ovens

With a double row of tubes on each level, and refractory hearth and ducts, the Olympic oven boasts a huge capacity and a seemingly endless base. The enormous storage capacity of its refractory hearth permits uninterrupted successive loading. Unsurprisingly given its size, the Olympic weighs between 10 and 15 tonnes.

The heating principle

The OLYMPIC oven comprises seamless continuous tubes meeting the requirements of TU 37 B. The tubes are guaranteed for 10 years.

These tubes are 21.6 mm in diameter and 3 mm thick. Each tube is cold-formed, then drilled on a numerically-controlled drilling bench before being welded then tested at a pressure of 400 bar to guarantee proper sealing. The lower part of the annular tubes is located in the heating area, i.e. in the masonry ducts.

This lower part of the tubes contains a very precise quantity of water that transforms to steam when the oven is heating up (using oil, gas or wood).
The water, now transformed to steam, flows evenly through all the tubes, ensuring that the oven is constantly heated.

Steam generation

Each level is equipped with cast iron block steam generators:

• 1 device per level for 2-burner ovens
• 2 devices per level for 3- and 4-burner ovens

The cast iron blocks weigh between 216 kg for the smallest model and 960 kg for the largest model.

Easy maintenance

• The electrical and mechanical parts are accessible from the front.
• Detachable up-and-over doors make maintenance straightforward.

• Electromechanical control panel.
• Automatic start-up clock.
• Push-button operated dual steam control (on both left/right columns).
• Type Z 6 CN 18-09 austenitic stainless steel front, work surface and hood with anti-drip grill (French AFNOR standard).
• Tempered glass up-and-over doors (10 mm thick) are heat resistant to a temperature of 350 °C and also thermal shock resistant. The glazing edges are sandstone polished for improved shock resistance.

• Manual exhaust on each level
• Special wood-fired hearth
• Brickwork façade
• Brickwork on 1 or 2 sides
• Electric top level
• Counterweight lift (column)
• Scissor lift
• Pellet burner

Special wood-fired hearth

Specially designed to be permanently heated by wood, this wood-fired hearth is built in the traditional way using refractory bricks, with a removable grill and ash pan: it takes 50-cm logs.

Particularly recommended for regions with plentiful supplies of timber, this model proves its worth where power cuts can spell disaster for production. This model can also be fitted with an oil or gas burner.